Products

1/4" F x 3/8" M BSP Adapter FittingLow-profile aftermarket adapter for threading the 1/4" anti-vacuum valve into a 3/8" Tee fitting. At 11mm tall, it's shorter than the OEM Simonelli brass adapter (#07300099), which measures 12mm tall.SPECIFICATIONS 1/4" F x 3/8" M BSP Height:...

1/4" Fixing Nut - ThinThin-profile 1/4" BSP fixing nut for tight-clearance plumbing connections.SPECIFICATIONS Thread: 1/4" BSP Profile: Thin COMPATIBILITYFits: Machines using 1/4" BSP thin-profile fixing nutsINSTALLATIONSimple DIY, basic hand tools.PRO TIPSThis thin profile exists specifically for tight-clearance spots where a standard-depth fixing nut won't...

1/4" Lock Nut (H8) - La Marzocco Group HeadThis is an H8 (8 mm tall) 1/4" lock nut, thicker than the standard 5 mm lock nuts, used on the inside of La Marzocco group heads. La Marzocco's own part number for it is L100/5.SPECIFICATIONSH8...

1/4" BSP Male x Male Elbow Fitting (Internal Thread)1/4" male-to-male elbow fitting with an internal thread, also used on La San Marco heat exchanger injectors (see SM_151), where the PTFE injector tubing threads in by hand.SPECIFICATIONS Thread: 1/4" BSP (both ends) Configuration: elbow with...

1/4" Male Brass Plug - Nuova Simonelli/Victoria Arduino Group HeadsA 1/4" male brass plug used to cap unused ports on Nuova Simonelli and Victoria Arduino group heads.SPECIFICATIONS Thread: 1/4" male Material: Brass COMPATIBILITY Fits: Nuova Simonelli Adonis, Appia, Appia II, Aurelia, Aurelia II (not...

1/4" BSP Male PlugStandard 1/4" male BSP threaded plug commonly used to blank off upper/lower sight glass and boiler ports on Faema-platform machines.SPECIFICATIONSThread: 1/4" Male BSPCOMPATIBILITY Fits: Faema-platform boiler and sight glass ports Replaces: F_1253, F_194 INSTALLATIONDIY-friendly, apply thread sealant and thread in by...

1/4" BSP Nipple Fitting, GenericA generic 1/4" British Standard Pipe nipple fitting, 23 mm overall length. Rancilio's own version of this fitting runs slightly shorter at 22 mm, so if you're matching an existing Rancilio fitting exactly, note the 1 mm difference.SPECIFICATIONS1/4" BSP thread,...

Stainless Steel Group Head / Drain Cup Fitting - 1/4" BSPStainless steel 1/4" male BSP x 1/4" male BSP fitting used at the group head and drain cup on La Marzocco espresso machines.SPECIFICATIONS1/4" M BSP x 1/4" M BSP; stainless steelCOMPATIBILITY Fits: La Marzocco...

1/4" M x 1/4" F BSP 90 Elbow FittingGeneric nickel-plated 90° elbow fitting, 1/4" male x 1/4" female BSP.SPECIFICATIONS 1/4" M x 1/4" F BSP, 90° elbow Nickel-plated Nuova Simonelli OEM part #: 07300013 COMPATIBILITY Fits: Nuova Simonelli machines using this elbow fitting Replaces:...

1/4" BSP Male x Female FittingGeneric brass British Standard Pipe (BSP) fitting, 1/4" male x 1/4" female, useful as a coupler, extension, or adapter in espresso machine plumbing.SPECIFICATIONSThread: 1/4" BSP (both ends)COMPATIBILITYFits: any 1/4" BSP threaded fitting or valve portINSTALLATIONHand-thread and snug with a...

1/4" BSP Tee Fitting, Male x Female x FemaleGeneric BSP tee fitting with one male and two female ports, found mostly in Nuova Simonelli and Victoria Arduino machines.COMPATIBILITYWorks with: primarily used in Nuova Simonelli and Victoria Arduino machinesINSTALLATIONSimple DIY swap with a wrench.

1/4" M x 1/4" M BSP L FittingA universal L-shaped fitting with parallel (BSP) threads on both 1/4" male ends, a general-purpose elbow used wherever a 90-degree turn is needed in a water or steam line.SPECIFICATIONS Thread: 1/4" BSP male x 1/4" BSP male,...

1/4" M x 1/4" M Closing ValveThis closing valve seals off a 1/4" line with male threads on both ends, commonly used to isolate water or steam circuits during service work.SPECIFICATIONS1/4" male BSP x 1/4" male BSPCOMPATIBILITY Fits: 1/4" BSP plumbing circuits Works with:...

1/4" M x 1/4" M L FittingL-shaped 1/4" BSP thread fitting, OEM Nuova Simonelli.SPECIFICATIONS1/4" M x 1/4" M BSP (British Standard Pipe) threadCOMPATIBILITYFits: Nuova Simonelli machines using this 1/4" BSP L-fittingINSTALLATIONSimple DIY, hand tools with thread sealant.PRO TIPSUse PTFE tape or thread sealant on...

1/4" BSP Fitting, Male x Male x FemaleGeneric BSP fitting with two male ports and one female port, most commonly found in Nuova Simonelli and Victoria Arduino equipment.SPECIFICATIONSThread: 1/4" BSP, male-male-female configurationCOMPATIBILITYWorks with: primarily used in Nuova Simonelli (Victoria Arduino) equipmentINSTALLATIONSimple DIY plumbing swap...

1/4" M x 1/4" M x 1/4" M BSP T-FittingNickel-plated brass T-fitting with three 1/4" male BSP connections, useful for splitting or joining water and steam lines.SPECIFICATIONS 1/4" M x 1/4" M x 1/4" M BSP Nickel-plated brass COMPATIBILITYWorks with: 1/4" BSP plumbing runs...

La San Marco 1/4" x 1/8" BSP Closing ValveA small BSP ball valve used specifically on La San Marco machines to close off a secondary water or steam line.SPECIFICATIONS1/4" male BSP x 1/8" female BSP ball valveCOMPATIBILITY Fits: La San Marco machines Replaces: SM_392...

1/4" M x 1/8" M BSP Brass 90° ElbowA brass 90-degree reducing elbow fitting, 1/4" male BSP on one end stepping down to 1/8" male BSP on the other. This is a CMA-specific fitting used in plumbing runs where a tight-radius direction change and...

1/4" M x 130 mm Auto-Fill ProbeThis auto-fill probe monitors reservoir water level on a range of Nuova Simonelli and Victoria Arduino machines. It ships without the recommended sealing gasket, so plan to order one alongside it.SPECIFICATIONS Thread: 1/4" Male Length: 130 mm COMPATIBILITYFits:...

1/4" M x 3/8" M BSP Boiler FittingA boiler fitting with a conical-shaped sealing end, similar in application to our V_313 but with a different seat geometry.SPECIFICATIONS Thread: 1/4" Male x 3/8" Male BSP Seat: conical COMPATIBILITYWorks with: espresso machine boiler plumbing using 1/4"...